Hear from Our Customers
You’re not just paying to scrub walls. You’re getting containment barriers that stop spores from reaching your HVAC system, HEPA filtration that clears the air while we work, and moisture mapping that finds hidden growth before it eats through your floor joists.
Every mold remediation project gets photographed, logged, and reported within 24 hours. You’ll know what we found, where it came from, and what we did to fix it—because your insurance adjuster will ask, and you deserve answers either way.
When the job’s done, you get a post-remediation walkthrough and a follow-up two weeks later. Not because we’re worried—because basements in Lamong can be tricky, and we want to make sure the problem stays gone.
We’ve been handling water damage and mold cleanup in Central Indiana since 2016. We’re IICRC-certified in mold remediation, water restoration, and structural drying—not because it looks good on a website, but because it’s required to do this work correctly.
We’re also BBB-accredited, EPA RRP-compliant where it matters, and we answer our phone. If you call at 2 a.m. because your sump pump failed and you’re smelling mildew, someone picks up. We’re usually on-site in Lamong within 60 to 90 minutes.
Indiana’s humidity doesn’t take weekends off, and neither do we. You’ll work with a local crew that knows what happens when July condensation meets a fieldstone foundation—and how to dry it out before the drywall gets soft.
First, we show up fast. You call, we dispatch, and we’re typically at your door in about an hour. We’ll assess the damage, take moisture readings, and give you a transparent estimate aligned with Xactimate pricing—the same software your insurance company uses.
Next, we contain the area. That means plastic sheeting, negative air pressure, and HEPA filters running to keep mold spores from spreading into clean rooms. We wear protective gear, shoe covers, and treat your home like it’s ours.
Then we remove the mold. We don’t just spray and pray—we pull out affected materials if they’re too far gone, treat surfaces properly, and verify moisture levels are back to normal. If your crawl space is still damp, we’ll dry it. If your ducts got contaminated during a fire cleanup, we’ll address that too.
You get a full report within 24 hours, updates every 48 hours, and a dedicated claims liaison if insurance is involved. After we’re done, we walk the site with you and schedule a two-week check-in to confirm everything’s still dry.
Ready to get started?
Every mold remediation service includes containment setup, HEPA air scrubbing, removal of contaminated materials, antimicrobial treatment, and moisture control. If the source was a leaky pipe, we’ll coordinate with your plumber. If it’s a grading issue flooding your basement every spring, we’ll tell you.
Lamong sits in an area where older homes, high water tables, and summer humidity create a perfect recipe for basement mold. We see it in crawl spaces with dirt floors, behind washing machines that leaked for months, and in attics with poor ventilation. The job isn’t done until we’ve addressed the moisture source—not just the visible growth.
We also handle contents pack-out if your belongings need to be moved and stored during the job, odor neutralization if the mustiness has soaked into soft materials, and duct cleaning if your HVAC system pulled spores through the vents. You’re not paying for a surface scrub. You’re paying for a complete mold removal process that actually solves the problem.
If you’re military, a teacher, a first responder, or a senior, we offer discounts on non-insurance work. It’s a small way to say thanks to the people who keep Central Indiana running.
Most mold remediation projects in the Indianapolis area run between $1,000 and $3,000, with the average landing around $2,000. Your actual cost depends on the size of the affected area, how deep the contamination goes, and whether we’re treating drywall or tearing out studs.
Small jobs—like a patch of mold under a sink—might cost less. Larger projects involving crawl spaces, attic sheathing, or multiple rooms will cost more. We use Xactimate pricing, so our estimates align with what your insurance adjuster will see.
If your mold was caused by a sudden event like a burst pipe, your homeowner’s policy may cover it. If it’s from long-term humidity or a slow leak you didn’t catch, coverage gets tricky. We’ll work directly with your insurance company either way and give you a transparent breakdown up front—no surprises on the final invoice.
Most residential mold remediation jobs take one to five days, depending on the scope. A single bathroom with surface mold might be done in a day. A finished basement with contaminated insulation and framing could take a week.
The timeline depends on how much material we need to remove, how long it takes to dry out the space, and whether we’re waiting on clearance testing. We don’t rush—cutting corners just means the mold comes back in three months, and nobody wants that.
You’ll get a realistic timeline during the initial assessment. We’ll also keep you updated every 48 hours so you’re never wondering what’s happening. If something changes—like we find a hidden moisture pocket behind a wall—we’ll let you know immediately and adjust the plan.
It depends on what caused the mold. If a pipe burst, your water heater failed, or a storm damaged your roof and water got in quickly, most policies will cover the mold remediation that follows. Sudden, accidental water damage usually qualifies.
If the mold grew because of long-term humidity, a slow leak you didn’t notice, or deferred maintenance, coverage gets murky. Insurance companies typically won’t pay for gradual damage or neglect.
We work with your insurance company directly. Our claims liaison will review your policy, submit documentation, and handle the back-and-forth so you’re not stuck translating contractor-speak to your adjuster. Even if insurance doesn’t cover it, you’ll get transparent pricing and a clear scope of work before we start. No gotchas.
Mold removal usually means cleaning visible mold off surfaces. Mold remediation means addressing the entire problem—removing contaminated materials, controlling moisture, containing the work area, and preventing future growth.
You can’t just spray bleach on drywall and call it fixed. If the drywall is saturated or the mold has penetrated porous materials like insulation or wood framing, those materials need to come out. Remediation also includes air filtration, antimicrobial treatment, and verification that moisture levels are back to normal.
True mold remediation follows IICRC standards. That means containment barriers, negative air pressure, proper disposal of contaminated materials, and documentation at every step. It’s the difference between a quick fix and a solution that actually lasts.
You’ll usually smell it before you see it—a musty, earthy odor that doesn’t go away even after you clean. You might also notice discoloration on walls, ceilings, or around windows, especially in bathrooms, basements, or crawl spaces.
Health symptoms are another clue. If you’re dealing with a persistent runny nose, coughing, headaches, or worsening asthma that improves when you leave the house, mold exposure could be the cause. People with compromised immune systems, young kids, and older adults tend to react more severely.
Mold grows where there’s moisture. Check areas that have flooded, spots where condensation builds up, and anywhere you’ve had plumbing leaks. In Lamong, basements and crawl spaces are prime real estate for mold because of high humidity and temperature swings. If you suspect a problem, get a mold inspection. Waiting just gives it more time to spread.
If it’s a small patch—less than 10 square feet—on a non-porous surface like tile, you can probably handle it with the right cleaner and some elbow grease. Anything bigger, anything on drywall or wood, or anything involving black mold should be handled by a certified mold remediation company.
Black mold releases spores when disturbed. Without proper containment and filtration, you’ll spread those spores throughout your house. Without protective gear, you’ll breathe them in. And without addressing the moisture source, it’ll grow back.
Professional remediation includes containment barriers, HEPA air scrubbers, safe removal of contaminated materials, and verification that the space is dry and clear. It’s not about scaring you—it’s about doing the job right so you’re not dealing with the same problem six months from now. If you’re not sure whether your situation qualifies as DIY or pro territory, call us. We’ll give you an honest answer.
Local Resources
Useful Links
Other Services we provide in Lamong
